-
71-75 Shelton Street Covent Garden, London, UK.
Skip to content
Heat Press Settings & HTV Guide
Interactive tools to find the right temperature, time, pressure and peel for every VENYL series – and to estimate how much vinyl your job needs.
Tool 1
Heat Press Settings Calculator
Choose the film, fabric and equipment – the recommended settings update instantly.
Recommended settings
140 °C
Temperature (284 °F)
12 s
Press time
Medium
Pressure
Hot or cold
Peel
- Wait 24 h before the first wash; wash inside-out at max. 40 °C.
Values are starting points based on our lab tests. Press displays can deviate – verify with a thermometer and always test on the actual garment.
Tool 2
Vinyl Usage Estimator
Estimate how many metres of HTV you need for a production run.
Estimated material
11.55 m
incl. 10% waste / test cuts
1 per row · 50 rows
1 × 25 m roll(s)
Basics
How to Apply VENYL® HTV
Mirror & cut
Mirror the design and cut with the shiny carrier facing down.
Weed
Remove excess vinyl with a hook tool right after cutting.
Press
Pre-press, position, cover and press with the calculated settings.
Peel & post-press
Peel at the right temperature and post-press for 3–5 seconds.
Heat Press Instructions
- Cover with Heat Transfer Cover Sheet or Multiuse Paper
- If needed, preheat the garment for up to 3 seconds
- Apply article at 285°F/140°C (for NS, ST and RF series)
- Use medium pressure for 5–15 seconds
- Smooth peeling carries on hot and cool (depends on the material)
Home Iron Instructions
- Set iron temperature dial between Cotton and Linen
- Preheat the material if needed
- Cover with Heat Transfer Cover Sheet or Multiuse Paper
- Use flat and hard surface (soft or ironing board not recommended)
- Press the iron with medium/firm pressure (do not slide iron)
Important note after application of VENYL HTV
- Wait 24 hours before the first wash.
- Machine wash warm or cold with mild detergent.
- Dry on normal dryer setting. Do not dry clean.
- A liquid fabric softener is not recommended.
Want these settings for your own brand?
Tell us about your project – we reply within one business day with pricing, lead times and free sample options.